Sun Printing with Paint

Lynda here again. The very first time I sun printed fabric I used cheap fabric paint. Since I didn't know any better, I thought it was pretty cool. That was 4 years ago.

My first attempt at sun printing on fabric

Since then I've done quite a bit of sun printing and am partial to a couple products. But I thought for my post this week I'd revisit the paint, but this time use good fabric paint and screen printing ink. I was pretty surprised at the results.

I decided to paint both pieces of fabric with similar colors and fern placement so that I could get a good comparison.

So let's get started. After covering my work surface with plastic, I mixed up my paints - one set of Jacquard Textile Paint and the other Speedball Fabric Screen Printing Ink. You can use the paints full strength for a real dark color, but I mixed them a little with water. How much water is up to you. I've mixed them half and half and various combinations. However, I like my pieces darker so I tend to mix with less water.

Screen printing inks mixed and ready to use

While I was mixing the paints, my fabric has been sitting in water. It's important that the fabric stay moist. Once the paints were ready, I squeezed my fabric to get most of the water out of it, and spread it on my table smoothing it to get out the wrinkles.

Once I was happy with my fabric, it was time to start painting. I use sponge brushes for this. If you are painting in the sun you need to work fast so the paint doesn't dry. However, I keep a spray bottle with water nearby to keep the fabric moist.

After I'm happy with the painting job, I add masks. These can be botanicals, stencils, lace, wood cutouts, or whatever you'd like to use to make a design on this fabric.  (I've tried using plastic ferns and they don't work. First of all, they won't lay flat on the fabric. I tried putting a piece of glass over them to keep them down and that did not work at all!!) Whatever you are using as a mask needs to be able to be flat on the fabric so it blocks out the sun.

As I put my ferns down, I use a little more paint to help them adher to the fabric.

After I'm done with the placement of the masks,  I check to see that the ferns are flat on the fabric.  I usually help that process with with a little spray from my water bottle. If the ferns or whatever you are using aren't flush against the fabric, you won't get a really clean print. 

Once I'm happy with my design,  it's time for the sun to do it's thing.

Left: textile paints; Right: Screen printing inks

Now is the hardest part - waiting for the fabric to dry!

I'll be back tomorrow with the results.

Playing with Stencils

IN the scrapbooking section of the local Joann's store, there are these laser-cut papers that looked like they would make cool stencils.  So I bought a few on sale and tried to figure out how to use them.  They're made of heavy paper, but I wanted to use them to stencil dye on fabric.



Well, Mr S came to the rescue.  In his own personal stash he had some stuff that he uses to coat the handles of tools with rubber so that they have non-slip grips.  Why not try it?


So after a test on some notebook paper, I sprayed it on my laser-cut paper and it worked!  It made my paper stencil usable with wet media.

Alternatively, I suppose I could have just used paint, but this was too cool to pass up.  Mr. S claims it comes in different colors, so I could have had something in other than basic black.

I had these boring hand-dyes, so I stenciled on some thickened dyes.  But the dye wasn't strong enough (it's been in my fridge for a while) and it's better, but still pretty boring.

I was too impatient to do more dyes.  So I got out my Setacolor paints and rolled on some fuchsia and purple.

And voila!  Much more interesting.

I had these boring bits from my deconstructed screen printing experiments.  So I made up a plate with cardboard and hot glue and used these colored pencil sticks to rub the design onto the fabric.

I really liked the circular feel of Nienke's Rosarium (here) And I tried to get the feel of it without copying her work.  --Still pretty boring.

So I took a cue from her and stenciled on flowers and leaves and sprayed them with water.  I'm not crazy about mine.  Maybe it needs some gold?  I think that the paint colors fight with the background color.  And the circular thing just isn't happening at all.

But for this side, I used a mixture of golden yellow and purple paint and just rolled it on over a stencil of leaves and I love this one.  The colors are much better together and I could see using this whole or cutting it up.