Tuesday, November 25, 2014

Let the monoprinting begin

These are two sheets of lexan I got as scraps from the glass store. One is 10" X 12.5" and larger one is 12" X 21.5


I cut the fabric the same size as the lexan but the big mistake I made was not ironing it before I started to print. However I DID remember to put my new apron on (when I started to wipe the paint on my new jeans). Jeans are clean!!




I used ProFab fabric paint.




Not enough paint



Perfect amount of paint



I puled the fabric tight on the ends but I'm still happy with the print.



First print on the large lexan and too much paint



Nice print, just the right amount of noise




This I really like



And of course I had to involve my sketchbook since there was paint on the roller






5 comments:

  1. These are great Beth. I love using this method too.

    ReplyDelete
  2. This is so cool! I had never seen this method before. I must find some time to try it!

    ReplyDelete
  3. Very nice and I love this technique. I used it a lot on paper in the past, and recently on fabric too. But for the fabric I used a sheet of perplex, and that did not work well. Are you going to colour it too?

    ReplyDelete
  4. I'm still not sure exactly what you did to get your prints since you painted the entire sheet of plastic. Could you give us some more detail of what you did instead of just some pictures?

    ReplyDelete
  5. A great set of results. I am assuming that you drew over the already drawn lines once you had laid the paper down?

    ReplyDelete

Although this blog is no longer active, we will get your comments so please feel free to share them.