Round Robin, Solo Style - Intro and Preparation

This month, the topic will be “Round Robin, Solo Style”!  If you have never participated in a round robin, typically you have a group of people participating, and each one starts with a piece of fabric, uses a surface design treatment to start it off, then sends (or passes if you are close enough) to the next person, who does the same, each adding something to each of the fabrics until they have gone full circle.  Well, in this instance, I am playing round robin solo style.  I will start with a piece of fabric and use multiple techniques to create the finished fabric, and I have two  others joining me later in the month… each of us will be doing our own fabrics and sharing the results with you.  Laura McGrath and Beth Berman will be joining in, but I hope to hear from you as well, should you choose to give this a try!  So break out the supplies and put on your creative hats, we’re ready to go!

Step 1 - Preparing

I have given some thought to what I hope to accomplish in these posts, and to start with, I thought I would talk a little about techniques and supplies.

I have created a list of surface design techniques to give me ideas:

Fabric Dyeing

Batik

Stamping

Screen Printing

Monoprinting

Stenciling

Foiling

Discharge dyeing

Breakdown printing

Clamp-dyeing

Masking

Spray dyeing

I might not use all of these techniques, but I plan to use several, depending on what the fabric tells me as I go along.

Supplies– I have accumulated a lot over the time I have been playing with surface design techniques – I think I will display them as I go, but here is a partial list for those of you who want to follow along:

Cotton fabric – I generally use bleached muslin, but that is because I do a lot of dyeing.  For those of you who don’t dye fabric, I’m sure you can use other fabrics for your project, as long as they are compatible with whatever mediums you plan to use.

Soy Wax for batik, and a wax pot.  I have a thermostatically controlled deep fryer I bought at Wal-Mart, but there are a number of products you can buy from fiber arts suppliers that will do the job.

Fabric dyes – I use Procion MX dyes, along with soda ash mixer to activate the dyes.  To launder, I use synthrapol textile detergent.  I buy my supplies at Dharma Trading Co. in Calif., but I know That Pro Chemical and Dye offers dyeing supplies, and I’m hoping that those of you in Europe, Australia and other non- U.S.A. locations have resources for dyeing supplies.

Stamping – I make a lot of my own stamps, and will talk a little about what I have used.  I recently purchased a gelli-art plate and hope to use that in my stamping or monoprinting.

Screen printing – again, I have some basic skills in making screens, but also highly recommend thermofax screens and can recommend some resources for ready made or custom screens.  

I will touch on the other techniques as I get to them.

Other supplies – a project board is helpful –I made one of a ceiling tile, batting, fabric and staples, then covered it with a plastic trash bag held on with duct tape… had it for almost 7 years now, and it’s still going strong!

Rubber or latex gloves – I use the heavy duty ones, but light weight disposable ones will work also.

Misc - T-pins, duct tape, masking tape, spring clamps, plastic trays or paper plates, sponge brushes and/or rollers, brayers, plastic spoons… all will be helpful.  I will try to remember to list additional tools or supplies as I go along, but feel free to make up your own list as you may be using techniques not covered here that require different supplies.

Okay, time to get started!  My next post will cover the first couple of “Rounds”.